The MS118 boasts an impressive power output in an incredibly small format. The same ultra-fast, ultra precise neodymium 18 inch driver as the class leading MS218 delivers in an extremely small taper-reflex format. The MS118 is packaged with all the features the extremely successful MS218 has; Overblast technology, carefully designed custom handles, large heatsink for optimised dissipation and taper-reflex design to name a few. The MS118 couples perfectly with all Hill products as a stackable subwoofer cabinet.

  • Making an Impression

    Each unit accepts a +4 dBu balanced input via 3 pin XLR male and female connectors, and collects power via Neutrik PowerCON connector. The product features a simple yet easy to read signal / peak light system on the rear. Up to two MS118 can be coupled on the same power line.

  • Overblast

    The MS118 has been equipped with the same OverBlast™ technology as other Hill amplified products. This enables the fan circuit to follow the audio input and act accordingly. Loud music allows the fan to blast, but silence causes the fan system to slow down.

  • Format

    The classic Hill taper-reflex design, features a premium grade 18" driver with an immense 64mm linear excursion capacity, housed in an enclosure constructed from Baltic birch. This combines with the ultra-linear Chameleon™ amplifier to deliver precise, tight, wide-band LF performance. The result is true recreation of the punch from a kick drum, the heavy flow of a bass guitar and the depth of a keyboard with equal assurance.

  • Absolute Precision

    The MS118 delivers exceptional low frequency pattern control and can be configured in multiple array formats to minimize back-stage and off-site spill. With no internal destructive limiting DSP, the MS118 delivers full impact, all the time.

Technical Information

  • 20k

  • +6dBv

  • 30Hz - 120Hz +/- 4dB

  • 136dB (1)

  • 2200 Watts (2)

  • self-powered tapered reflex sub bass loudspeaker enclosure

  • Format controlled

  • single neodymium energised 18" sub bass driver / Chameleon total linear power amplifier

  • powerCON in

    powerCON out

    XLR input

    XLR output

  • Height: 506mm

    Depth: 480mm

    Width: 730mm

  • 51.5 kg

    113.5 lb

1 Measured pink noise calculated to 1m (average concert level -12dB)
2 Specified as the maximum instantaneous undistorted RMS power.